Programming the PIN code terminal - PIN code terminal

You only need to programme the PIN code terminal once with the locking system data.

  1. LSM open.
  2. Programming device (SmartCD.G2) connected.
  3. Length of User PIN the set (see Determining the PIN length).
  4. Mode selected (see Set mode).
  5. Locking device prepared in LSM (see Preparing locking devices in LSM).
  6. If knowledge mode is used: User already created (in stock) and authorized (see Creating users).
  7. If a different mode is used: If necessary, user created and authorised for the locking device.
  1. Open the properties of your locking system using Edit - Locking system properties.
  2. Change to the PIN-Code Terminal tab.
  3. Click on the Program / Reset button.
  4. The window PIN-Code Terminal opens.
  6. Select your locking device in the area Doors with PIN code terminals.
  7. Align the PIN code terminal and the programming device (distance 10 cm to 20 cm).
  8. Click on the Programming button.
  9. When prompted, press 1 for more than two seconds.
  10. PIN code terminal beeps and flashes green twice.
  11. Programming starts.
  1. PIN code terminal is programmed.