Changing the user PIN - PIN code terminal

Your users can change the User PINs themselves at the PIN code terminal:

The user selects their User PIN themselves. The User PIN must meet the following requirements:

The example shows the change of a user PIN with eight digits. If the length of the user PIN is not eight digits, the length of the numerical code will differ.

  1. Activate the identification medium on the locking device.
  2. The locking device does not engage, but beeps and flashes for a short time. This is normal in this case.
  3. Press 0 for more than two seconds to activate programming mode.
  4. PIN code terminal beeps and flashes orange once.
  5. Enter 06.
  6. Enter the old User PIN.
  7. Enter the new User PIN.
  8. Re-enter the new User PIN.
  9. PIN code terminal beeps and flashes red-green.
  10. PIN code terminal beeps and flashes green twice.
  1. User PIN is changed.