Specifications - Locking cylinder (Z4) DoorMonitoring

NOTE

notice

DM cylinders must not be used in multi-lock systems with gears (gear locking devices).

DM.AP2 cylinders without bolt monitoring are an exception and can also be used in multi-lock systems with gears.

Standard design

The DM Cylinder is supplied in the following standard configuration:

  • .DM DoorMonitoring
  • .G2 available as G2 only
  • .ZK access control, time zone management and events logging

The following accessories must be ordered with the standard configuration:

  • Z4.DM.dd.SCREW.n Fastening Screw

NOTE

notice

You must indicate the backset when ordering the fastening screw

The fastening screw is manufactured to match the backset and is a few millimetres longer

Information is only correctly transferred to the cylinder if the fastening screw is the right length.

dd represents the lock's backset. Standard fastening screws are supplied for backsets between 25 and 110 mm at increments of 5 mm. Greater lengths are possible at increments of 5 mm.

Options

The following options are available for the DM Cylinder:

  • .FD - freely rotating
  • .AP2 - anti-panic cylinder (no monitoring in the bolt position)
  • .HZ - half cylinder
  • .FH - fire retardant version (increased transmission range)
  • .WN(M).LN.I Integrated LockNode, with or without auto-configuration

Installation lengths

The DM Cylinder is supplied at 30-35mm and larger (outside – inside).

Order codes

Refer to the respective current price list or the current product catalogue for the corresponding product codes.