Escape&Return - System description SVCN

DoorMonitoring SmartHandles come with the Escape&Return function. This allows opening without the need to press an identification medium again, shortly after the door was closed.

The function is activated by selecting the corresponding check box and the specification of a time window in the integrator system. It must then be programmed with the SmartIntego tool.

NOTE

notice

Escape & Return: Legal situation

The Escape & Return Timeout can be between 30 s and 240 s (WO) respectively 1 s and 240 s (SVCN). The use and configuration of Escape & Return may be subject to legal regulations (e.g. Norway).

  1. Inform yourself in advance about legal regulations.

A sensor in the SmartHandle detects that the inside handle has been operated. The SmartHandle then engages for an adjustable time and signals this visually and acoustically.

Disengagement takes place after the previously defined time. The user can also disengage the locking device manually (thus canceling the escape and return function) by holding his card two seconds in front of the lock's card reader.

The signalling of the Escape&Return function can be switched off.

Example:

If a guest leaves their hotel room and smells smoke in the corridor, they can go back into their room immediately.

Example 2:

Student residence / retirement home: In many cases, the user notices that he forgot the card immediately after he or she closed the door. With Escape & Return the user can solve this problem himself.