Locking system password - System description SVCN

The SmartIntego tool uses the locking system password to programme the configuration into the locking devices. The configuration can then only be read out from the locking devices with the locking system password. This means that the locking system password protects the locking device configuration from unauthorised access.

The locking system password is required for every programming. Once the locking system password has been entered, it can no longer simply be changed.

The project file (*.ikp) also contains the locking system password in encrypted form.

IMPORTANT

Loss of locking system password and project file

If you lose both the locking system password and the project file, components can no longer be reset or configured, even by SimonsVoss. The components are then unusable!

  1. Write down your passwords.
  2. Keep your passwords secure.
  3. Backup your project file.

NOTE

notice

Loss of passwords

Your passwords are the basis for managing your locking system. Lost or publicly known passwords are a serious security risk and/or lead to loss of control over the system.

  1. Make a note of your passwords.
  2. Store your passwords in a safe place.

Change/Loss

  1. Reset system (locking device).
  2. Create a new project file.
  3. Set up system with new password (locking device).
  • If lost, the project file can be used (reset)
  • Restoration not possible

If the project file and locking system password are lost, the locking system firmware must be replaced.