Dimensional drawings - SmartLocker AX

To assess compatibility, please note the following information:

Wooden doors

• The door must be between 10 mm and 25 mm thick.
• With metal spindles, at least two adapter plates must therefore be used for standard material thicknesses (1 mm to 2 mm).
• Depending on the bolt block, the bolt has a clearance of 5.9 mm to 10.4 mm from the claw of the engine block. If necessary, you must attach adapter plates to the door frame so that the bolt rests on the door frame without play and the door does not fold.

Metal doors

• The door panel and adapter plates must be between 10 mm and 25 mm thick altogether.
• With metal spindles, at least two adapter plates must therefore be used for standard material thicknesses (1 mm to 2 mm). However, due to the rebate in the door or frame, the use of adapter plates is usually required anyway.
• The deadbolt stop of the frame may not be more than 30.4 mm from the inside of the door when closed.
• The distance between the outside of the door and the inside of the bolt must not exceed 35.4 mm. This means that the maximum height of the rebate for metal doors is 10.4 mm (A).