Installation of SKG/VdS cylinders - Locking cylinder (Z4) 3061

Loosen the outside knob's threaded pin using an Allen key. Do not unscrew completely. Hold the inside knob firmly and then turn the outside knob anti-clockwise.

Turn the cam until it is vertical and pointing downwards. Insert the digital locking cylinder through the lock from the inner side. Fasten the cylinder into the mortise lock with the fastening screw. Then screw the outside knob back into position on the cylinder and tighten the threaded pin.

IMPORTANT

Damage resulting from liquids

This product contains electronic and/or mechanic components that may be damaged by liquids of any kind.

    Violent action on the thumb turn

    Don't strike the thumb turns when installing the cylinder.