Technical specifications - RouterNode 2

General

Dimensions

172 mm × 86 mm × 33 mm

Weight

About 100 g

Material

ABS plastic, UV-stable

Colour

White (like RAL 9016 "Traffic white")

Installation

• horizontal
• vertical
• Wall mounting possible
• Integrated strain relief (3x)

Connections

• RJ45 (Network/PoE)
• Round plug Ø 5.5 mm, Ø pin 2.0 mm (power supply)
• Screw terminal block 2-pole, wire diameter 0.14 mm² to 1.5 mm² (power supply for external applications)
• MCX socket (optional external antenna)

Power supply via PoE and round plug possible simultaneously: round plug > 12 V_DC → Round plug used, round plug < 12 V_DC → PoE used

Connections (can only be used on RouterNode 2)

• Spring terminal block 10-pin, wire diameter 0.14 (rigid) or 0.2 (flexible) mm² to 0.5 mm² (IO connector, can only be used with RouterNode 2)

Environment

Temperature

• Operational: -10 °C to +55 °C
• Storage: -20 °C to +60 °C

Humidity

Max. 90%, non-condensing

Standard protection rating

IP20

Electric

Operating voltage

9 V_DC to 32 V_DC (reverse polarity protected) or PoE according to IEEE 802.3af

Power supply via PoE and round plug possible simultaneously: round plug > 12 V_DC → Round plug used, round plug < 12 V_DC → PoE used

Output

max. 3 W

Output VOUT

3.0 V_DC to 3.3 V_DC, max. 200 mA

Relay output O1

• Max. switching voltage 30 V_DC/24V_AC (resistive load)
• Max. switching current 1 A (resistive load)

Digital outputs O2/O3

Max. switching voltage 12 V_DC, max. switching current 100mA (resistive load)

Interfaces

RJ45

• Network interface
• 10T/100T
• HP Auto_MDX
• DHCP-Client (DHCP: on)
• IPv4
• Service
• TCP: 1x at Port 2101
• UDP: 1x for Digi-Scan (OAM tool)
• Web server: Enable

868 MHz radio

WaveNet interface, range up to 30 m

Analogue input

1x with 12-bit resolution from 0 to 3.3 V_DC

Digital inputs

3x. An external contact connected to VOUT changes the logic state from 0 to 1.

• Low/Logical 0: 0 V_DC to 0.8 V_DC
• High/Logical 1: 2.0 V_DC to 3.3 V_DC
• Maximum voltage: 4.1 V_DC

Digital outputs

2x open drain.

Relay contacts

1x change-over contact, potential-free.

Signalling

LED

RGB LED (centre of housing)

Software

Programming

via TCP/IP interface