Double-click simulation (block lock operation on block lock 3066) - PIN code keypad (offline)

You can use the PIN code keypad 3068 for activating SimonsVoss activation units (VdS block lock 3066). If a correct PIN has been entered, the activation unit is addressed. The block lock then activates or deactivates the alarm system. You can meet the requirements of VdS Class C to SG6 with the integration of a so-called mental lock.

The VdS-certified SimonsVoss activation units require a double opening protocol for activation/deactivation (= double click if a transponder is to be used to activate or deactivate). The PIN code keypad 3068 can simulate this double-click and thus perform activation/deactivation operations. The double-click simulation is not activated by default.

For this, you must mount the PIN code keypad 3068 within the transmitting range of the activation unit. You can then activate the double-click simulation.

IMPORTANT

Malfunctions due to double-click simulation

The double-click simulation is only intended for operation with a SimonsVoss Block Lock 3066. It can cause malfunctions on other components.

  1. Activate double-click simulation only if you are using a SimonsVoss Block Lock 3066!

NOTE

notice

Cancellation of actions

All actions can be cancelled by not making any further inputs. The PIN code keypad 3068 will cancel the action after a waiting period.

Enter the numbers consecutively. The PIN code keypad 3068 only signals the pressing of the keys, but not completion of the individual steps in the process.

Battery warning locks programming

If one of the two battery warning levels is active, the programming cannot be changed.

  1. Replace the batteries (see Battery replacement).
  2. Change the programming as required.

Activate double-click simulation

  1. Enter the number sequence 000.
  2. Enter the Master PIN.
  3. Enter the number sequence 92.
  4. PIN code keypad 3068 beeps and flashes green twice.
  1. Double-click simulation is activated.

Deactivate double-click simulation

  1. Enter the number sequence 000.
  2. Enter the Master PIN.
  3. Enter the number sequence 91.
  4. PIN code keypad 3068 beeps and flashes green twice.
  1. Double-click simulation is deactivated.