Programming PINs - PIN code keypad (offline)

You can programme up to three User PINs in the PIN code keypad 3068.

Each User PIN behaves like its own transponder. The individual User PINs must therefore be programmed separately in the respective transponders.

If you do not want to use all User PINss, leave them unprogrammed.

  1. Enter the number sequence 0.
  2. Enter the Master PIN.
  3. Enter the number of the User PIN (for example, 1 for User PIN no. 1).
  4. Specify the number that determines the length of the User PIN (for example, 4 for a four-digit User PIN).
  5. Enter the new User PIN.

  6. NOTE

    notice

    Requirements for the User PIN

    The User PIN must be secure. It must therefore meet the following requirements:

    1. The User PIN must consist of four to eight characters.
    2. The digits of the User PIN must not be consecutive.
    3. The digits of the User PIN may not be identical.
    4. The User PIN must not begin with 0.
    5. The User PINs may not be identical.
  7. PIN code keypad 3068 beeps and flashes green twice.
  1. User PIN is programmed.

Repeat the process to programme other User PINs in the PIN code keypad 3068.