Resetting transponders - PIN code keypad (offline)

You can reset the integrated transponders at any time using the LSM software.

  1. Read out the transponder that you want to reset (see Reading out the transponders).
  2. Enter the number sequence 00.
  3. Enter the Master PIN.
  4. Click on the Reset button.
  5. The window LockSysMgr opens.
  6. Click on the Yes button.
  7. Window closes.
  8. Enter the number of the User PIN (for example, 1 for User PIN no. 1).
  9. PIN code keypad 3068 beeps and flashes green twice.

  10. NOTE

    notice

    Radio error

    If you hold the transponder too close to the programming device or activate the transponder too early, the radio link cannot be established.

    1. Keep a distance of about 20 cm!
    2. Do not activate the transponder until you are prompted in the LSM software to press the transponder button.
  1. The window Programming opens.
  2. The transponder is reset.