Signal - PIN code keypad (offline)

1 x green, short

1×

Number entry

You have entered a number.

2 x green, short

2×

Transponder, active

You have entered a correct PIN.

Programming successful

You have successfully programmed an integrated transponder.

Reset successful

You have successfully reset an integrated transponder.

Master PIN changed

You have successfully changed the Master PIN.

1× red, long

1× long

Incorrect entry

You have entered an incorrect User PIN or the incorrect Master PIN.

Yellow (1 Hz)

beeping (1 Hz)

Duration: 10 s

Battery Warning Level 1

The batteries PIN code keypad 3068 are low. The PIN code keypad 3068 operates the locking device only after a delay of ten seconds. Replace the batteries (see Battery replacement). Changes to the programming are no longer possible until the battery is changed.

Yellow (1 Hz)

beeping (1 Hz)

Duration: 20 s

Battery Warning Level 2

The batteries PIN code keypad 3068 are very low. The PIN code keypad 3068 operates the locking device only after a delay of twenty seconds. Change the batteries immediately (see Battery replacement), otherwise the PIN code keypad 3068 may not function. Changes to the programming are no longer possible until the battery is changed.

Red (1 Hz)

beeping (1 Hz)

Duration: 60 s

Multiple incorrect entry (5x)

You have entered an incorrect User PIN or the incorrect Master PIN multiple times. The PIN code keypad 3068 beeps and flashes red for 60 seconds. You cannot make any entries during this time. Then enter a correct User PIN or one that Master PIN.