Assembly - FORTLOX Cylinder

  1. Ensure that the FORTLOX Cylinder is the correct length before installation.
  1. If necessary, use a FORTLOX Key to turn the cam clockwise to the 0° position.
  3. Insert the FORTLOX Cylinder into the mortice lock.
  5. Hold the FORTLOX Cylinder fest und ziehen Sie den FORTLOX Key out of the cylinder again.
  6. Stellen Sie sicher, dass sich der FORTLOX Cylinder is in the correct position and secure it with the faceplate screw (PH2).
  1. FORTLOX Cylinder is installed.

IMPORTANT

Unauthorised access by drilling from the inside

The outside of the FORTLOX Cylinder is equipped with drill protection, depending on the model.

If you find an inside (IN) marking on the cylinder body, install the FORTLOX Cylinder so that this side is located in a protected area.