G2 battery replacement transponder - G2 Transponder

A G2 battery replacement transponder can be created in the LSM software (Version 3.0 or higher) for G2 locking systems. If the battery is low, the locking device will switch to freeze mode and can no longer be opened with normal transponders. The battery replacement transponder can eliminate freeze mode when activated on the cylinder. The locking device can then be opened with an authorised transponder. This means you no longer need to take the programming device to enable the locking device.

CAUTION

Depleting batteries through misuse

The battery is depleted further each time it opens a locking device in conjunction with a battery replacement transponder. This may lead to the batteries being fully discharged if the transponder is not used for its intended purpose! The batteries must be replaced immediately in such cases.