Changing of the Master PIN - MobileKey PIN code keypad (offline)

The Master PIN is only used to change the programming on the PIN code keypad. You cannot operate any locking devices with the Master PIN.

IMPORTANT

Master PIN loss

The Master PIN is an essential, integral part of the security concept. No more administrative changes can be made to the device if the Master PIN is lost.

  1. Keep the Master PIN in a safe place.
  2. Make the Master PIN visible for authorized persons at any time.

You only have to change the Master PIN during initial operation, after which the change is optional.

  1. Enter the number sequence 0000.
  2. Enter the old Master PIN (factory setting: 12345678).
  3. Enter the new Master PIN.

  4. NOTE

    notice

    Requirements for the Master PIN

    The Master PIN must be secure. It must therefore meet the following requirements.

    1. The Master PIN must consist of eight characters.
    2. The digits of the Master PIN must not be consecutive.
    3. The Master PIN must not begin with 0.
  5. Enter the new Master PIN again.
  6. PIN code keypad beeps and flashes green twice.
  1. Master PIN is changed.