Operating modes - MobileKey PIN code keypad (offline)
The PIN code keypad differentiates between four operating modes.
Status | Explanation |
|---|---|
Standby | Sleep mode. The PIN code keypad consumes very little energy. |
Opening | Active mode. The PIN code keypad checks the input and, if the input is correct, actuates the locking device via radio (see How it works and Operation). |
Programming | PIN programming: The individual PINs (max. three) are programmed/reset directly via the keyboard (see PIN programming). Programming PINs). |
Transponder programming: The associated integrated transponders (max. three) are programmed/reset via the LSM software (see Programming the transponders). | |
Battery warning | Low battery. A two-stage battery warning system signals you in good time when you need to change the battery (see Signal und Battery replacement). |
NOTE
Locked programming with low battery
If the battery warning is active, you cannot change the programming of the PIN code keypad. You cannot change or delete any User PIN.
- Replace the batteries (see Battery replacement).
- Perform the desired change.