Using keys without the USB config device - MobileKey

All keys (transponders) must be programmed using the USB config device at the moment. This makes things particularly difficult when there is no access to a Windows or Android device. You will find below a way in which you can assign pre-programmed keys with any supported end device without needing to use a USB config device:

  1. Locks with ONLINE extension.
  2. Locks with "ONLINE" status.
  3. Matrix screen open
  1. First of all, create a number of keys, such as Key Extra1, Extra2, Extra3 and so on.
  2. These keys are not assigned authorisations to begin with.
  3. Programme all keys once with the USB config device and make them with a name if required.
  4. A key can obviously also be read at a later point in time.
  5. Instead of adding a new key and programming it with the USB config device, simply change the properties of a key that you added previously, such as "Extra1".
  6. Click on the key you have already created, e.g. "Extra1" and select EDIT.
  7. Change the name.
  8. Optionally enter data for "Valid from" and "Valid to" .
  9. Click on the SAVE button and return to the matrix.
  10. Key is saved.
  11. Authorise the key for all required locking devices.
  12. Click on the button SAVE.
  13. Programming takes place online via the SmartBridge.
  1. Keys are authorised on selected locks.