Signalling - Programming device SmartCD2.G2
LED 1 lights up green. |
| USB cable connected: programming device ready for USB operation. USB cable not connected: programming device ready for Bluetooth operation. |
LED 1 flashes green. | Programming device in standby mode. |
LED 2 lights up yellow. |
| Batteries are being charged. |
LED 2 is off. | Batteries are fully charged. |
The second LED only lights up when:
- The programming device is connected to a suitable USB port for charging and
- At least one of the batteries must be charged.
LED 3 flashes green quickly. |
| Communication with a SimonsVoss locking device. |
LED 3 flashes green slowly. | No connection. |
The third LED only lights up when wireless communication is active (e.g. programming, readout) between the programming device and a corresponding locking device.
LED 4 lights up blue. |
| Bluetooth active. |
LED 4 is off. | Bluetooth inactive. |
The fourth LED lights up while the Bluetooth interface is being used for programming, reading or resetting. It turns off automatically once the process is complete.