Signalise firmware version - SmartIntego PIN code keyboard online

With firmware 31.14.16.12 or higher, the SmartIntego PIN code keypad can display the last digit of the firmware and its product family (see also Differences in operation depending on firmware version).

Type in the numbers for the individual steps consecutively and carry out the steps one after the other without pausing.

  1. Press and hold 0 for about two seconds.
  2. Enter 000003.
  1. SmartIntego PIN code keypad beeps and flashes several times.

Evaluation

The SmartIntego PIN code keypad signals according to the following scheme:

n × long green + m × short green + long green or orange (n = 0, 1, 2,...; m = 0, 1, 2,...)

The last digit of the firmware can be calculated using the following formula: 5n+m. The last flashing digit indicates the product family: green = SmartIntego, orange = MobileKey.

Example: The SmartIntego PIN code keypad signals: 2 × long, 2 × short and then long green signals. The last number of the firmware version is 12, the product family is SmartIntego.