Set to storage mode - MobileKey PIN code keyboard online

NOTE

notice

If the PIN code keypad online is to be used in a different system, the PIN code keypad online not only needs to be deleted in the configuration view, but also set to storage mode.

The PIN code keypad online can be reset to storage mode. This process also deletes all network settings.

Type in the numbers for the individual steps consecutively and carry out the steps one after the other without pausing.

  1. Press and hold 0 for about two seconds.
  2. Enter 0000.
  3. Enter the Master PIN.
  1. PIN code keypad online beeps and flashes green briefly twice.
  2. Storage mode set.

NOTE

notice

If the PIN code keypad online is already in storage mode, it cannot be set to storage mode again. In such a case, the process will be interrupted with a red flashing light and beeping for a long time.