Accessories - MobileKey SmartRelay
SmartRelay can be combined with a variety of accessories. Carefully check which combinations can be used before placing an order.
Accessories for SmartRelay 3063 G1
SREL | SREL.ZK | SREL.ADV | |
MOD.SOM8 | X | ||
SREL.AV | X | ||
SREL.BAT | X | X | X |
Accessories for SmartRelay 3063 G2
SREL.G2 | SREL.ZK.G2 | SREL.W.G2 | SREL.W.ZK.G2 | |
WNM.LNI.SREL.G2 | X | X | ||
SREL.BAT | X | X | ||
SREL.AV | X | X | ||
SREL2.COVER1 | X | X |
Accessories for SmartRelay 3063 (G2)
SREL2.G2.W | SREL2.ZK.G2.W | SREL2.ZK.MH.G2.W | |
SREL.AV | X | ||
WNM.LNI.SREL2.G2 | X | X | X |
SC.M.I.G2 | X | ||
SC.M.E.G2.W | X | ||
SREL2.COVER1 | X | X | X |
- SC.M.E.G2.W (Mifare smart card, external, G2 white)
- A maximum of two external card readers (SC.M.E.G2.W) and an internal card reader (SC.M.I.G2) can be connected to a SREL2.ZK.MH.G2.W or SREL2.ZK.MH.G2.W.WP. If two external card readers are connected to an SREL2, then a dip switch placed at the "on" position must be connected to an external card reader. The dip switch is found on the right-hand side beneath the 26-pin plug connector on the card reader.
- The cabling type used to wire components should be CAT5 (FTP) or a higher quality. Shielded control cabling may also be used. Cable length: max. 10 m. An own power supply and own wiring should be installed if the cable line length is > 3m for the external card reader.
- SC.M.I.G2 (Mifare smart card, internal G2)
- The internal card reader is plugged directly into the SREL2.
- SmartRelay 2 WP version
- Weatherproof design. This option is also available for all SREL2s. You must seal the bushing yourself under your own responsibility. We recommend using suitable materials such as silicon or other resistant sealing materials. The housing features an IP65 design.