Synchronisation of database and actual state

Everything you change in AXM Lite is stored in the database only (for the time being). There is no automatic connection between the database and your locking devices or identification media.

Changes only take effect after synchronisation (see Synchronisation: Comparison between locking plan and reality). You can see by the symbol in the matrix that something has changed here since the last synchronisation and that a locking device or identification medium needs to be synchronised.

Data is transmitted in both directions during synchronisation:

From the database to the locking device/identification medium, e.g. authorisation changes
From the locking device/identification medium to the database, e.g. battery levels

IMPORTANT

Changes to the locking system only take effect after synchronisation

If you edit the locking system with the AXM Lite, the changes are initially only saved to your database.

Your actual components will not know about these changes until they are synchronised.

Regularly check the components in the matrix for synchronisation requirements (see The AXM’s structure).
In the event of critical incidents (e.g. identification medium lost), it is particularly important to synchronise immediately after responding to the incident (see Synchronisation: Comparison between locking plan and reality).