Resetting the identification medium

You must reset a component such as a transponder before it can be used again for an identification medium or another locking system.

  1. Suitable programming device connected.
  2. AXM Lite open.
  3. Identification media list or matrix view open.
  1. Click on the identification medium you wish to reset.
    If the identification medium is not available in your locking system: Click on any identification medium and identify the identification medium (see Identifying an unknown ID medium). Then continue.
  2. The identification medium window will open.
  4. Click on the Synchronisation: button.
  5. Synchronise window will open.
  7. Select the programming device you wish to use to reset your identification medium from the Programming device drop-down menu.
  8. Click on the Reset button.
  9. If necessary, select which of the existing data records you wish to reset.
  11. If necessary, enter the locking system password for the locking system to which this data record belongs.
  13. The checkbox for the data record to be reset is activated.
  15. Click on the OK button.
  16. Follow any further instructions as necessary.
  17. Identification medium is being reset.
  2. Identification medium is reset.