Time switchovers
You can automatically engage and disengage your locking devices with time switchovers.
- To do this, specify days and time intervals in a time switchover (see Creating a time switchover).
- Then add the locking devices you require to this time switchover (see Engaging and disengaging locking devices automatically with time switchover).
- Last of all, determine the required behaviour for each of the locking devices you require (see Engaging and disengaging locking devices automatically with time switchover).
As a general rule, the following applies:
- Your locking devices behave as in office mode within a time interval.
- Your locking devices behave as in impulse opening mode outside a time interval.
The behaviour can be regulated even more precisely with the following options:
Schließungseigenschaften - Zeitumschaltung Konfiguration: Manuelles Auskuppeln [offen]
Locking device disengages:
- Outside the time intervals and
- If authorised identification medium is activated
It remains disengaged. You can also engage the locking device outside the time intervals for the set impulse duration using an authorised identification medium (see Leaving the locking device open for longer, less time or permanently for setting the impulse duration).
Schließungseigenschaften - Zeitumschaltung Konfiguration: Automatisches Auskuppeln [offen]
Locking device disengages:
- Time interval ends
It remains disengaged. You can also engage the locking device outside the time intervals for the set impulse duration using an authorised identification medium (see Leaving the locking device open for longer, less time or permanently for setting the impulse duration).
Schließungseigenschaften - Zeitumschaltung Konfiguration: Manuelles Einkuppeln [offen]
Locking device engages:
- Within the time intervals and
- If authorised identification medium is activated
Example: Store in the shopping centre where the sliding door mustn’t open automatically during the shopping centre’s opening hours. The store owner could be delayed due to a traffic jam and the store would open with no-one in control.
Locking device remains engaged for the time interval.
You can also disengage the locking device during the time interval using an authorised identification medium (exception: 
Schließungseigenschaften - Zeitumschaltung Konfiguration: Transponder aktiv: nur, wenn ausgekuppelt [offen] option activated).
Locking device then remains disengaged until:
- You press an identification medium again during the same time interval: Locking device engages again, time switchover continues as usual.
- In the case of Schließungseigenschaften - Zeitumschaltung Konfiguration: Manuelles Einkuppeln [offen] option: a new time interval starts and an identification medium is activated.
- In the case of Schließungseigenschaften - Zeitumschaltung Konfiguration: Automatisches Einkuppeln [offen] option: a new time interval starts.
Schließungseigenschaften - Zeitumschaltung Konfiguration: Automatisches Einkuppeln [offen]
Locking device engages:
- time interval starts
Locking device remains engaged for the time interval.
You can also disengage the locking device during the time interval using an authorised identification medium (exception: Schließungseigenschaften - Zeitumschaltung Konfiguration: Transponder aktiv: nur, wenn ausgekuppelt [offen] option activated).
Locking device then remains disengaged until:
- You press an identification medium again during the same time interval: Locking device engages again, time switchover continues as usual.
- In the case of Schließungseigenschaften - Zeitumschaltung Konfiguration: Manuelles Einkuppeln [offen] option: a new time interval starts and an identification medium is activated.
- In the case of Schließungseigenschaften - Zeitumschaltung Konfiguration: Automatisches Einkuppeln [offen] option: a new time interval starts.