Synchronising the locking device (including reading access list)

Synchronisation is bidirectional:

Access lists can be imported separately (Read access list button). Access lists can also be easily read during synchronisation as an option (see Reading access list/physical access list during synchronisation).

The imported data can then be displayed (see e.g. Displaying and exporting a locking device’s access list or Display locking device equipment and status).

  1. AXM Lite open.
  2. Locking device list or matrix view open.
  3. Suitable programming device connected.
  1. Click on the locking device you wish to synchronise.
  2. The locking device window will open.
  3. Click on the Synchronisation: button.
  4. Synchronise window will open.
  5. Select the programming device which you wish to use to synchronise from the Programming device drop-down menu.
  6. NOTE


    AX components: SmartCD.MP or SmartStick AX for initial synchronisation

    A great deal of data is transferred during initial synchronisation of AX components. The carrier frequency and, consequently, the transmission speed is significantly higher with the SmartCD.MP or SmartStick AX.

    1. It is especially important to use a SmartCD.MP or a SmartStick AX for initial synchronisation of AX components.
  7. Click on the Synchronisation: button.
  8. Locking device is being synchronised.
  1. Locking device is synchronised.



First transponder activation rejected after initial programming of AX products

If a transponder is the first identification medium to be activated after initial programming, the transponder is rejected once and synchronised with the locking device in the background. Transponders will then function as normal.