Reuse identification medium in the same project

With AXM Classic, you can simply use the same identification medium for several locking systems.

If you are working with cards, AXM Classic will even check whether the set card configurations are compatible with one another or whether, for example, the sectors would overlap:

  1. AXM Classic open.
  2. At least two locking systems created in the same project (see Create locking system).
  1. Click on the orange AXM icon .
  2. AXM bar opens.
  4. Select the Transponder entry in the LOCKING SYSTEM CONTROL group.
  6. The AXM bar will close.
  7. The Transponder tab will open.
  8. Use to sort/filter the displayed entries if required (see Sorting and filtering).
  9. Click on the identification medium you would like to use in another locking system.
  10. The identification medium window will open.
  12. Click on the Additional locking systems tab.
  14. Window switches to the Additional locking systems tab.
  16. Select the locking system in which you would like to reuse the identification medium from the Locking system drop-down menu.
  18. Click on the Add button.
  19. The selected locking system is listed in the table.
  21. Click on the Finish button.
  22. Your AXM Classic will check whether the locking systems are compatible.
  23. The identification medium window closes.
  24. Reused identification media are automatically added to the other locking systems.
  26. Synchronise the identification medium (see Synchronise an identification medium (including importing physical access list)).
  1. All locking systems in which the identification medium is used are automatically synchronised.

Recognition by the serial number

Both identification media have the same entry in the Serial number field in the Transponder window.

One look at the programmed transponder tells you that it really is the same transponder:

Recognition by the programmed data sets

You can also recognise use in other locking systems by the programmed data records:

  1. Transponder open.
  1. Click on the Synchronisation: button.
  2. The Synchronise transponder window will open.
  4. Expand the Programmed records area.
  1. You can see the locking system you added earlier in the programmed data sets.