Creating an area

Areas are a very useful structure for your locking system (also see Areas).

  1. AXM Classic open.
  1. Click the orange AXM button .
  2. AXM bar opens.
  4. Select the Sector entry in the LOCKING SYSTEM CONTROL group.
  6. The Door Groups tab will open.
  8. Click on the New button.
  9. The Sector window will open.
  11. Enter a name for your area in the Name field.
  12. Select a schedule that you wish to use for the locking devices in this area from the Time plan drop-down menu if required.

  14. NOTE

    notice

    Available schedules

    Obviously, schedules that you wish to use for an area need to be available. If there are no schedules in your locking system, the Time plan drop-down menu is greyed out.

    1. Create at least one schedule beforehand (see Creating a schedule) in such a case.
  15. Enter a description of your area in the Description field if necessary.
  16. Click on the Finish button.
  17. Sector window closes.
  1. The newly created area is listed.

NOTE

notice

Schedules in locking devices and areas

You can assign schedules both to a locking device and to the locking device area. In this case, the schedule is used in the locking device and the schedule for the area is ignored.

If a schedule is assigned to an area instead of the locking device, the schedule for the area is adopted for the locking device. The suffix "(inherited)” in the locking device window indicates that this is the case.