Creating an identification medium

Your users can use identification media to engage and disengage locking devices (also see Identification media, locking devices and the locking plan).

NOTE

notice

Activating the PIN code keypad

AXM Classic also supports the PIN code keypad but it is not displayed for your locking system by default.

  1. Activate the PIN code keypad for your locking system manually if required (see Enabling PIN code keypads).

Activating cards or transponders for a locking system

The only credential types available are those that have been activated in your locking system.

  1. If necessary, activate cards or transponders in the locking system properties (see Enable cards or transponders).
  1. AXM Classic open.
  1. Click on the New transponder button.
  2. The window for creating an identification medium will open.
  4. Select the identification medium you wish to create from the Type drop-down menu.
  6. Enter a description if required.
  7. If the identification medium needs time-controlled authorisations: Activate the Time group check box.
  8. Select the time group from the Time group drop-down list (e.g. Time group).
  9. Activate the New person check box.
  10. AXM Classic will automatically create a new person for the new identification medium. Deactivate this check box to select an existing person (e.g. for a second identification medium or a replacement identification medium).
  11. The Person details tab is shown.
  12. Click on the Person details tab.
  14. Enter the surname and first name of the person who will receive the identification medium in the Last name and First name fields.
  15. The surname and first name will be displayed in the matrix at a later point in time.
  16. The personnel number is generated automatically.

  18. NOTE

    notice

    Personnel number formula or manual entry

    The AXM Classic generates personnel numbers based on the following formula: PN-1, PN-2, PN-X. The abbreviation PN can be changed if required (see Changing automatic numbering).

    Alternatively, you can enter personnel numbers manually:

    1. Activate the Auto check box.
    2. The Personnel number field is activated.
    3. Enter the personnel number in the Personnel number field.
  19. If you wish to assign this person to a person group: Select the person group to which this person belongs from the Person group drop-down menu.
  21. Give further details about the person if required.
  22. You can then simply select the information you enter in the Department field from a list for other persons.
  23. If you want to edit the Set on, Quitting date or Date of birth fields: Deactivate the relevant Not relevant check box.
  24. Use the Next > button to switch to the next tab or complete the entries with the Finish button.
  26. If locking devices need to open twice as long for this identification medium (doubling to max. 25 s): Activate the Long opening check box.
  27. If locking devices should not beep for this identification medium: Activate the No acoustic opening signal check box.
  28. If the locking devices on which the identification medium was used need to be saved on the identification medium: Activate the Audit trail check box.
  29. If the transponder is not to be used immediately: Activate the as of now check box. Then enter an activation date.
  30. If the transponder is only to be used for a limited period: Activate the Without expiration date check box. Then enter an expiration date.
  31. Use the Additional locking systems button to switch to the next tab or complete the entries with the Finish button.
  32. If you wish to use the identification medium in other locking systems in this project: Use the Add button to add further locking systems (see Use identification media in multiple locking systems).

  33. NOTE

    notice

    Limitations for Transponder - Additional locking systems

    Depending on the type of identification medium, different volumes of memory space are available for additional locking devices (e.g.: G2 transponders can store four G2 locking systems). The locking system also needs to support the identification medium (e.g.: transponders cannot be used in card-only locking systems).

    1. Make sure that there is sufficient memory space on your identification medium.
    2. Make sure that the required locking system supports your identification medium. Upgrade the locking system if necessary (see Enable cards or transponders).
    3. Ensure that the locking system memory spaces do not overlap in the case of cards.
  34. Use the Next > button to switch to the next tab or complete the entries with the Finish button.
  36. Use to sort/filter the displayed entries if required (see Sorting and filtering).
  37. Select the required authorisation groups in the right column (Ctrl+click for single groups or Shift+click for multiple groups).
  38. Use to move the selected authorisation groups only or to move all displayed authorisation groups.
  39. The identification medium is assigned to the highlighted authorisation groups.

  41. NOTE

    notice

    Double-clicking as an alternative to arrow keys

    Double-clicking an entry in the list will also move this entry to the other column.

  42. Use the Next > button to switch to the next tab or complete the entries with the Finish button.
  44. Use to sort/filter the displayed entries if required (see Sorting and filtering).
  45. Select the required hashtags in the right column (Ctrl+click for single hashtags or Shift+click for multiple hashtags).
  46. Use to move only the selected hashtags or to move all hashtags.

  47. NOTE

    notice

    Double-clicking as an alternative to arrow keys

    Double-clicking an entry in the list will also move this entry to the other column.

  48. The highlighted hashtags in the left-hand column are used for this identification medium.
  50. Activate the Create additional objects check box to exit the window with the same settings open for the next identification medium to be created.
  51. Click on the Finish button to create the identification medium.
  52. The window for creating a new identification medium closes.
  1. Newly created identification medium is listed or displayed in the matrix.